|
XCORE SDK
XCORE Software Development Kit
|
Device TX rate set bitmask used in sl_wfx_set_tx_rate_parameters_req_body_t. More...
#include <sl_wfx_cmd_api.h>
Public Attributes | |
| uint8_t | b1Mbps: 1 |
| If set, the device may use 802.11b 1Mbps data rate. | |
| uint8_t | b2Mbps: 1 |
| If set, the device may use 802.11b 2Mbps data rate. | |
| uint8_t | b5P5Mbps: 1 |
| If set, the device may use 802.11b 5.5Mbps data rate. | |
| uint8_t | b11Mbps: 1 |
| If set, the device may use 802.11b 11Mbps data rate. | |
| uint8_t | unused: 4 |
| Reserved, set to zero. | |
| uint8_t | g6Mbps: 1 |
| If set, the device may use 802.11g 6Mbps data rate. | |
| uint8_t | g9Mbps: 1 |
| If set, the device may use 802.11g 9Mbps data rate. | |
| uint8_t | g12Mbps: 1 |
| If set, the device may use 802.11g 12Mbps data rate. | |
| uint8_t | g18Mbps: 1 |
| If set, the device may use 802.11g 18Mbps data rate. | |
| uint8_t | g24Mbps: 1 |
| If set, the device may use 802.11g 24Mbps data rate. | |
| uint8_t | g36Mbps: 1 |
| If set, the device may use 802.11g 36Mbps data rate. | |
| uint8_t | g48Mbps: 1 |
| If set, the device may use 802.11g 48Mbps data rate. | |
| uint8_t | g54Mbps: 1 |
| If set, the device may use 802.11g 54Mbps data rate. | |
| uint8_t | mcs0: 1 |
| If set, the device may use 802.11n 6.5Mbps data rate. | |
| uint8_t | mcs1: 1 |
| If set, the device may use 802.11n 13Mbps data rate. | |
| uint8_t | mcs2: 1 |
| If set, the device may use 802.11n 19.5Mbps data rate. | |
| uint8_t | mcs3: 1 |
| If set, the device may use 802.11n 26Mbps data rate. | |
| uint8_t | mcs4: 1 |
| If set, the device may use 802.11n 39Mbps data rate. | |
| uint8_t | mcs5: 1 |
| If set, the device may use 802.11n 52Mbps data rate. | |
| uint8_t | mcs6: 1 |
| If set, the device may use 802.11n 58.5Mbps data rate. | |
| uint8_t | mcs7: 1 |
| If set, the device may use 802.11n 65Mbps data rate. | |
| uint8_t | unused2 |
| Reserved, set to zero. | |
Device TX rate set bitmask used in sl_wfx_set_tx_rate_parameters_req_body_t.
1.9.1