Typedefs
typedef enum sl_wfx_error_e	sl_wfx_error_t
	specifies the type of error reported by the indication message sl_wfx_error_ind_body_t

Enumerations
enum	sl_wfx_error_e { SL_WFX_ERROR_FIRMWARE_ROLLBACK = 0x0 , SL_WFX_ERROR_DEPRECATED_0 = 0x1 , SL_WFX_ERROR_DEPRECATED_1 = 0x2 , SL_WFX_ERROR_INVALID_SESSION_KEY = 0x3 , SL_WFX_ERROR_OOR_VOLTAGE = 0x4 , SL_WFX_ERROR_PDS_VERSION = 0x5 , SL_WFX_ERROR_OOR_TEMPERATURE = 0x6 , SL_WFX_ERROR_REQ_DURING_KEY_EXCHANGE = 0x7 , SL_WFX_ERROR_DEPRECATED_2 = 0x8 , SL_WFX_ERROR_DEPRECATED_3 = 0x9 , SL_WFX_ERROR_SECURELINK_DECRYPTION = 0xa , SL_WFX_ERROR_SECURELINK_WRONG_ENCRYPTION_STATE = 0xb , SL_WFX_SPI_OR_SDIO_FREQ_TOO_LOW = 0xc , SL_WFX_ERROR_DEPRECATED_4 = 0xd , SL_WFX_ERROR_DEPRECATED_5 = 0xe , SL_WFX_HIF_BUS_ERROR = 0xf , SL_WFX_PDS_TESTFEATURE_MODE_ERROR = 0x10 , SL_WFX_ERROR_SECURELINK_EXPECTED_BITMAP = 0x11 }
	specifies the type of error reported by the indication message sl_wfx_error_ind_body_t More...

Detailed Description

Enumeration Type Documentation

specifies the type of error reported by the indication message sl_wfx_error_ind_body_t

Enumerator
SL_WFX_ERROR_FIRMWARE_ROLLBACK	Firmware rollback error, no data returned.
SL_WFX_ERROR_DEPRECATED_0	Not used anymore.
SL_WFX_ERROR_DEPRECATED_1	Not used anymore.
SL_WFX_ERROR_INVALID_SESSION_KEY	Secure Link Session key is invalid (probably not initialized)
SL_WFX_ERROR_OOR_VOLTAGE	Out-of-range power supply voltage detected, the last voltage value is returned. Param: measured voltage (mV)
SL_WFX_ERROR_PDS_VERSION	Wrong PDS version detected, no data returned.
SL_WFX_ERROR_OOR_TEMPERATURE	Out-of-range temperature, no data returned.
SL_WFX_ERROR_REQ_DURING_KEY_EXCHANGE	Requests from Host are forbidden until the end of key exchange (Host should wait for the associated indication)
SL_WFX_ERROR_DEPRECATED_2	Not used anymore.
SL_WFX_ERROR_DEPRECATED_3	Not used anymore.
SL_WFX_ERROR_SECURELINK_DECRYPTION	An error occured during message decryption (can be a counter mismatch or wrong CCM tag)
SL_WFX_ERROR_SECURELINK_WRONG_ENCRYPTION_STATE	Encryption state of the received message doesn't match the SecureLink bitmap. Param: was encrypted.
SL_WFX_SPI_OR_SDIO_FREQ_TOO_LOW	SPI or SDIO bus clock is too slow (<1kHz)
SL_WFX_ERROR_DEPRECATED_4	Not used anymore.
SL_WFX_ERROR_DEPRECATED_5	Not used anymore.
SL_WFX_HIF_BUS_ERROR	HIF HW has reported an error. Param: HIF status register.
SL_WFX_PDS_TESTFEATURE_MODE_ERROR	Unknown TestFeatureMode during test feature init.
SL_WFX_ERROR_SECURELINK_EXPECTED_BITMAP	The SecureLink bitmap must be configured right after key exchange.