Contents Menu Expand Light mode Dark mode Auto light/dark mode
XVF3610 Voice Processor 5.6.0
Logo
XVF3610 Voice Processor 5.6.0
  • PRODUCT DESCRIPTION
    • XVF3610 Product Variants
    • System Architecture
    • Voice Processing Pipeline
    • Firmware release package
    • Required Tools
    • Configuration and control
    • Command-line interface (vfctrl)
    • vfctrl syntax
    • Configuration via Control interface
    • Configuration via Data Partition
    • Development kits
  • DATASHEET
    • Key features
    • Product overview
    • Audio Processing
    • Pin diagram
    • Device interfaces
    • Device operation
    • Device characteristics
    • Switching characteristics
    • Package information
    • Copyright & Disclaimer
  • USER GUIDE
    • Introduction
      • Overview
      • Audio processing
      • System Interfaces
      • Booting and Initial configuration
      • Default operation
    • Audio Processing Pipeline
      • Signal flow and processing
      • Signal Routing and Scaling
      • General Purpose Filter
      • PDM microphone interface
      • Automatic Echo Cancellation (AEC)
      • Automatic Delay Estimation & Correction (ADEC)
      • Interference canceller
      • Noise Suppressor (NS)
      • Automatic Gain Control (AGC) and Loss Control
      • Alternative Architecture mode (ALT_ARCH)
    • System Interfaces
      • General Purpose Input and Output and Peripheral Bridging
      • GPIO
      • General Purpose Inputs
      • General Purpose Outputs
      • I2C Master peripheral interface (XVF3610-UA Only)
      • I2C Slave Control interface (XVF3610-INT only)
      • Using I2C Master to write to a device
      • Using the I2C master to read from a device
      • SPI Master
    • System Boot and Initial Configuration
      • Boot process
      • Flash storage structure
      • Programming the Factory Boot image and Data Partition
      • Upgrade Images and Data Partitions
      • Generation of Binary Upgrade image
      • Addition of DFU Suffix to Binary files
      • Performing Firmware Updates
      • Factory restore
      • Boot Image and Data Partition Compatibility checks
      • Custom flash memory devices
      • SPI Slave Boot
      • Configuration and the Data Partition
      • Partition file structure
      • Item files
    • Device operation
      • Host Utilities
      • Command-line interface (vfctrl)
      • vfctrl Installation
      • vfctrl syntax
      • Configuration via Control interface
      • Configuration via Data Partition
    • USB Interface - (XVF3610-UA Only)
      • USB Interface
      • USB Configuration
      • USB HID interface
      • HID Report configuration
      • USB HID report format
      • HID report generation
      • Serial Number
      • USB device enumeration
    • Reference information
      • Base vfctrl command list
      • Advanced vfctrl command list
      • Boot status codes (RUN_STATUS)
      • Example .SPISPEC file format
      • USB enumeration
      • General purpose filter example
      • Command transport protocol
      • Flash programming and update flow
      • Capturing packed samples
      • Direct access to DSP Pipeline
  • XVF3615 WAKEWORD FEATURE DESCRIPTION
    • XVF3615 Voice Processor with Wake Word Engine
    • Management of Wake Word Models
    • Wake Word Configuration
    • XVF3615 Control interface
    • Wake Word Integration
    • XVF3615 SPI slave boot
  • Supported xcore architectures and required tools

Reference informationΒΆ

Reference:

  • Base vfctrl command list
  • Advanced vfctrl command list
  • Boot status codes (RUN_STATUS)
  • Example .SPISPEC file format
  • USB enumeration
  • General purpose filter example
  • Command transport protocol
  • Flash programming and update flow
  • Capturing packed samples
  • Direct access to DSP Pipeline
Next
Base vfctrl command list
Previous
Serial Number
Copyright © 2019-2022, XMOS Ltd | Last updated on Jun 24, 2022. | Created using Sphinx and @pradyunsg's Furo theme.