-
Example
Mid-range volume levels are increased without increasing low-level or high-level signals.
-
Early Development
This is a collection of utilities commonly used by the dsp audio modules
-
Example
A reverb-like effect is created by using the building blocks of delay, equalisation and 'bring-up' gain.
-
Early Development
The non-linear-gain function using 2 multplies/sample/channel, capable of processing around 12 channels of 48 KHz audio in parallel.
-
Early Development
A Delay-line library using a user-configurable number of delay-taps, max 32_taps x 4_channels at 48 KHz audio.
-
Early Development
A short 'reverb-like' effect is created using a combination of delays, filtering and gain-shaping, capable of processing up to 4 channels of 48 KHz audio in parallel.
-
Early Development
A long 'reverb-like' effect is created using a combination of delays, filtering and gain-shaping, capable of processing upto 4 channels of 48 KHz audio in parallel.
-
Example
Delays an a number of audio channels paasing through the SliceKit board creating an echo effect
-
Early Development
A sdram-delay library using a user-configurable number of delay-taps, max 32_taps x 4_channels at 48 KHz audio.
-
Early Development
A BiQuad library using 6 multplies per sample capable of processing around 4 channels of 48 KHz audio in parallel.
-
Example
A long reverb-like effect is created by using the building blocks of delay, equalisation and 'bring-up' gain.
-
Early Development
Basic Uart Transmitter where the functionality of the full generic uart transmitter module is not required
-
Example
An example applications that extends app_slicekit_simple_demo to demonstrate usage of the xSOFTip generic Uart RX/TX components and demonstrate extended features of how to handle concurrent events in the XC programming language.
-
General Use
SPI Master Function Library tested for operation up to 25MHz Sclk frequency and all four SPI modes
-
Early Development
Function Library implementing basic multi master I2C read and write functionality, designed for use with a multi bit port
-
General Use
Function Library implementing basic multi master I2C read and write functionality, designed for use with 1 bit ports
-
General Use
Octuple UART in Two Logical Cores, based on Serial2Ethernet reference design
-
Example
Usage Example for xSOFTip SPI Master Module with External Flash
-
General Use
Uart with the full range of baud rate (up to 115.2KBaud), parity, stop bits and bits per character support
-
Example
A demonstration of a simple device that can send and receive data through the CAN Phy layer.
-
Example
Usage Example for xSOFTip SPI Master Module looped back to xSOFTip Slave Module
-
General Use
Half-duplex RS485 transceiver component for operation up to 1 Mbps baud
-
Early Development
Basic Uart Receiver where the functionality of the full generic uart receiver module is not required
-
Example
Usage Example for xSOFTip Multi-UART Module
-
General Use
CAN Bus component
-
Example
Application to demonstrate module_uart_rx and module_uart_tx running looped back on a single Slicekti core board.
-
Roadmap
xSOFTip Quad SPI Flash (SPIFI)Controller Component
-
Example
Basic loopback demonstration for the RS485 component
-
General Use
Uart Receiver with the full range of baud rate (up to 115.2KBaud), parity, stop bits and bits per character support
-
Example
Application to demonstrate module_uart_fast_rx and module_uart_fast_tx running looped back on a single Slicekit core board
-
Example
An example applications that demonstrate various features of the XA-SK-GPIO Slice Card including the ADC, LEDs and buttons, the I2C master xSOFTip component, as well as various basic features of the xCORE processor.
-
Early Development
SPI Slave Function Library tested for operation up to 25MHz Sclk frequency and all four SPI modes
-
Example
Delays an a number of audio channels paasing through the SliceKit board creating an echo effect
-
Example
A full Display Controller application for driving the XA-Sk-480 LCD in conjunction with the SDRAM Controller and LCD Driver components.
-
Example
An example application to demonstrate the Wifi Slice controlling the LEDS and monitoring thebuttons and temperature sensor on the GPIO Slice.
-
Example
A long reverb-like effect is created by using the building blocks of delay, equalisation and 'bring-up' gain.
-
Example
An example applications that demonstrate various features of the XA-SK-GPIO Slice Card including the ADC, LEDs and buttons, the I2C master xSOFTip component, as well as various basic features of the xCORE processor.
-
Example
Demonstrates how the module is used to write to an LCD screen.
-
Example
A demo of the TCP/IP stack that provides a simple webserver
-
Example
This application showcases GPIO features which can be accessed and controlled over Ethernet via a webpage on an embedded webserver, using the GPIO and Ethernet Slices
-
Example
An example applications that extends app_slicekit_simple_demo to demonstrate usage of the xSOFTip generic Uart RX/TX components and demonstrate extended features of how to handle concurrent events in the XC programming language.
-
Example
Usage Example for xSOFTip Multi-UART Module
-
Example
Simple PWM driver component designed for xTimeComposer Tutorial
-
Example
A reverb-like effect is created by using the building blocks of delay, equalisation and 'bring-up' gain.
-
Example
Uses the I2S master in loopback mode to demonstrate usage of this component
-
Example
A simple 1722.1 example endpoint application
-
Example
AVB stack control API
-
Example
IEEE 1722 implement for talkers and listeners
-
Example
Implementation of IEEE 1722.1 Draft 21 for use with the AVB reference design
-
Example
Implementation of 1722 MAAP for assignment of multicast MAC addresses
-
Example
AVB functions for audio interfaces and sample FIFOs
-
Example
This module handles the media clock recovery of the incoming and outgoing AVB streams.
-
Example
Implementation of 802.1Qat stream reservation protocol. It needs to be used within the context of other XMOS AVB modules.
-
Example
Misc useful functions for timers, I/O, printing
-
Roadmap
CAN-CiA Conformant CANopen Stack
-
Roadmap
EtherCAT slave DLL
-
Roadmap
EtherCAT slave stack
-
Example
Implementation of IEEE 802.1AS gPTP clock synchronisation
-
Roadmap
LIN Bus Master Controller
-
Roadmap
LIN Bus Slave Controller
-
Roadmap
Modbus Serial Slave Controller
-
Roadmap
Powerlink Slave Controller With Built in Hub
-
Roadmap
Profibus DP Application Stack Library
-
Roadmap
Profibus Slave FDL layer
-
General Use
A library for configuring the sliceKIT Core Board ports
-
Roadmap
A software component to generate multiple, high-resolution, timed step and direction signals
-
Roadmap
Motion controller software component to handle reqests from the pulse generator component